Versiyon/Version: V1.01.00.30
Uyumlu Modeller/Compatible models: Samsung ML-1660, Samsung ML-1665, Samsung ML-1667
Türkçe :
Samsung ml 1660 v30 reset dosyalarını buradan indirebilirsiniz.Samsung ml 1660 v30 resetlemeyi nasıl yapacağınız ve dosyalarını nasıl kullanacağınız hakkında anlatım için aşağıdaki linki kullanabiirsiniz.
English :
Additional info:
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!
1. Connect the printer to the computer
2. When you turn the device on, hold the Cancel button until all lights begin flashing
3. Run the program through a file "f1660.exe" which is not in the folder
4. When the program has started, click on "V.30 patch firmware"
5. Afterwards in the folder a file is automatically created - "FIX_ML1660_V1.01.00.30.fls", "FIX_ML1665_V1.01.00.30.fls" or "FIX_ML1667_V1.01.00.30.fls" – the filename depends on the printer which it’s connected to
6. The created file needs to be dragged to the file icon "usblist2.exe"
7. Wait until the printer reprograms (1 minute) and restarts
8. After that the reprogramming process is finished, restart the printer
Attention!!
The firmware reprogramming file is not protected against any updates from the Samsung website! Do not download any updates yourself!
Samsung ML 1660 v30 Reset Download
Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!
1. Connect the printer to the computer
2. When you turn the device on, hold the Cancel button until all lights begin flashing
3. Run the program through a file "f1660.exe" which is not in the folder
4. When the program has started, click on "V.30 patch firmware"
5. Afterwards in the folder a file is automatically created - "FIX_ML1660_V1.01.00.30.fls", "FIX_ML1665_V1.01.00.30.fls" or "FIX_ML1667_V1.01.00.30.fls" – the filename depends on the printer which it’s connected to
6. The created file needs to be dragged to the file icon "usblist2.exe"
7. Wait until the printer reprograms (1 minute) and restarts
8. After that the reprogramming process is finished, restart the printer
Attention!!
The firmware reprogramming file is not protected against any updates from the Samsung website! Do not download any updates yourself!
Samsung ML 1660 v30 Reset Download
